Error Codes - Pkm WA8-ES1415DI Bedienungsanleitung

8.2 Error codes

E
RROR CODE
1. Water tap closed.
F 01
2. Water pressure too low.
Problems with
3. Water inlet hose is frozen.
the water
4. Filter is blocked.
inlet.
1. The
F 03
Problems with
2. Water drain hose was
the water
outlet.
3. Water drain hose is frozen. 3. Defrost the water drain hose.
4. Water
5. Water discharge is blocked. 5. Remove the blockage and
6. Drain
1. Door opening alarm.
F 14
P
OSSIBLE CAUSE
« S
P » - button is pressed
AUSE
and the programme is
paused.
installed too high.
drain
blocked.
pump
blocked.
~
( )
S
1. Open the water tap.
2. Wait some time.
3. Defrost the water inlet hose.
4. Remove the filters and clean
them.
/ 1. Press
TART
/ P
reactivate
programme.
Turn the rotary knob to position
« O
FF
switch off the appliance. Set the
programme « S
Speed = 0) to drain the water.
2. Max. height 125 cm.
hose is 4. Remove the blockage and
clean the hose.
clean the water discharge.
filter is 6. Remove the drain pump
filter and clean it.
2. Press the « S
-
BUTTON
tries to open the door. The
error code remains until the
door lock is deactivated. Or
turn the rotary knob to
position « O
seconds to switch off the
appliance.
programme. The error code
goes off.
~
150
M ( )
EASURE S
« S
» - button again to
AUSE
the
O
R
» for at least 3 seconds to
» (and Spin
PIN
/ P
TART
The appliance
» for at least 3
FF
Start
TART
set
»
AUSE
a