If you press the « M
washing programme, the cotton programme with its default parameters is
activated.
A pre-wash can be set for some washing programmes to increase the washing
effect and remove stains; see also chapter 4.3 T
A pre-wash before a wash programme is particularly suitable for heavily soiled
textiles.
When you activate the « P
wash compartment of the detergent drawer «
chapter 5.2 U
SE OF THE DISPENSER
The « P
-
RE
WASH
chapter 4.3 T
HE ADDITIONAL FUNCTIONS
H
OW TO ACTIVATE THE FUNCTION
To activate the « P
« O
» -
PTIONS
function goes on: «
If the selected programme cannot be combined with the desired functions, these
functions cannot be selected or will be cancelled and the indicators switches off
automatically.
An extra rinse cycle can be set for some wash programmes: the appliance runs
the normal rinse cycle of the set washing programme again before it starts the
softening cycle. The running time of the washing programme increases
accordingly.
The « E
R
XTRA
also chapter 4.3 T
W
» -
Y
ASH
BUTTON
F
« O
UNCTION
-
RE
WASH
» -
may not be available for all programmes; see also
FUNCTION
-
» -
RE
WASH
FUNCTION
repeatedly until the operational status indicator of this
BUTTON
».
F
« O
UNCTION
» -
INSE
FUNCTION
HE ADDITIONAL FUNCTIONS
briefly and have not yet set and saved a
»:
-
PTIONS
PRE
WASH
HE ADDITIONAL FUNCTIONS
» -
, also remember to fill the pre-
FUNCTION
ff.
.
« P
for a washing programme, press the
»:
PTIONS
EXTRA RINSE
may not be available for all programmes; see
.
~
~
126
» with detergent; see also
-
»
RE
WASH
.