Rinse Spin; Programming And Starting Of A Washing Programme - Pkm WA6-ES1015D Bedienungsanleitung

R &
INSE SPIN
S
PIN
D C
RUM LEAN

4.4 Programming and starting of a washing programme

1. Load the drum.
2. Fill the detergent(s) into the relevant sections of the dispenser according to the
desired programme.
3. Open the tap.
4. Set the desired programme using the
switched on and in
5. The (A) indicates the duration of the programme (hours : minutes)
DISPLAY
6. Additionally to the selected programme, further washing functions such as
temperature, spin speed, delay, etc. can be selected by pressing the corresponding
buttons; s. chapter 4.4.1 S
.
OPTIONS
7. Press the « S
TART
8. The door lock will be activated automatically. The operational status indicator of
the door lock «
9. When the programme is finished, the displays indicates « END » and an acoustic
signal sounds 29
10. The door lock is deactivated automatically after approx. 2 minutes. The
operational status indicator of the door lock «
11. When the programme is finished, always turn the
programme selection back to « O
also chapter 4.6 E
Depending on model.
28
Depending on model.
29
➢ Delay end
➢ Extra rinse
➢ Spin speed setting: up to 1000 rpm max.
➢ Reload laundry
➢ Child safety lock
➢ Delay end
➢ Spin speed setting: up to 1000 rpm max.
➢ Reload laundry
➢ Child safety lock
➢ Delay end
➢ Spin speed setting: up to 600 rpm max.
➢ Reload laundry
➢ Child safety lock
STANDBY MODE
ELECTION OF THE ADDITIONAL FUNCTIONS
/ P » -
AUSE BUTTON
» goes on.
.
ND OF A WASHING PROGRAMME
. The washing machine is now
ROTARY KNOB
.
(7) to start the washing programme.
» to switch off the appliance completely; see
FF
.
~ ~
103
/
WASHING
» goes off.
for the
ROTARY KNOB
.
28