Rinse Spin; Programming And Starting Of A Washing Programme - Pkm WA7-ES1415D Bedienungsanleitung

20 °C
R &
INSE SPIN
S
PIN
D C
RUM LEAN

4.4 Programming and starting of a washing programme

1. Load the drum.
2. Fill the detergent(s) into the relevant sections of the dispenser according to the
desired programme.
3. Open the tap.
4. Set the desired programme using the
switched on and in
5. The (A) indicates the duration of the programme (hours : minutes)
DISPLAY
6. Additionally to the selected programme, further washing functions such as
temperature, spin speed, delay, etc. can be selected by pressing the corresponding
buttons; s. chapter 4.4.1 S
.
OPTIONS
7. Press the « S
TART
8. The door lock will be activated automatically. The operational status indicator of
the door lock «
9. When the programme is finished, the displays indicates « END » and an acoustic
signal sounds.
Depending on model.
25
➢ Temperature setting: up to 20 °C max.
➢ Delay end
➢ Pre-wash
➢ Extra rinse / preset rinse cycles: 2
➢ Spin speed setting: up to 1400 rpm max.
➢ Reload laundry
➢ Child safety lock
➢ Delay end
➢ Extra rinse / preset rinse cycles: 2
➢ Spin speed setting: up to 1400 rpm max.
➢ Reload laundry
➢ Child safety lock
➢ Delay end
➢ Spin speed setting: up to 1400 rpm max.
➢ Reload laundry
➢ Child safety lock
➢ Delay end
➢ Reload laundry
➢ Child safety lock
.
STANDBY MODE
ELECTION OF THE ADDITIONAL FUNCTIONS
/ P » -
AUSE BUTTON
» goes on.
~
. The washing machine is now
ROTARY KNOB
(8) to start the washing programme.
~
105
25 .
/
WASHING