Pkm WA8-ES1415DI Bedienungsanleitung Seite 125

SAVING AND ACTIVATING OF AN INDIVIDUALLY SET WASHING PROGRAMME
 You can set and save a washing programme (programme, programme /
washing parameters, additional functions) according to your preferences using
the « M W
Y ASH
 For example: you usually wash your laundry in the cotton programme with
prewash at 30 °C washing temperature and a spin speed of 1400 rpm. However,
the default parameters of the cotton programme do not correspond to your
preferred washing parameters. To avoid changing the default programme
parameters (washing parameters) for each wash, you can set and save a washing
programme with your preferred programme parameters (see example below).
Only one washing programme can be individually set and saved using the « M
W » -
ASH FUNCTION
H
( :
EXAMPLE
1. Set the cotton programme using the
2. Set the washing temperature to 30 °C using the « T
3. Set the spin speed to 1400 rpm using the « S
4. Press the « O
PTIONS
of the « P -
RE WASH
5. Press and hold the « M
6. The following settings are saved:
.
WASH
If the selected programme cannot be combined with the desired functions, these
functions cannot be selected or will be cancelled and the indicators switches off
automatically.
H
OW TO ACTIVATE A SAVED WASHING PROGRAMME
1. Load the drum.
2. Fill the detergent(s) into the relevant sections of the dispenser according to the
desired programme.
3. Open the tap.
4. Press the « M
Y
5. The operational status indicator of the « M
6. The previously set and saved washing programme is activated.
7. Press the « S
TART
programme.
F
UNCTION
» - .
FUNCTION
.
OW TO SET AND SAVE A WASHING PROGRAMME
COTTON PROGRAMME
» - repeatedly until the operational status indicator
BUTTON
» -
FUNCTION
W » -
Y ASH
COTTON PROGRAMME
W » -
ASH BUTTON
/ P » -
AUSE BUTTON
« M W »:
Y ASH
/ 30 °C / 1400
ROTARY KNOB
EMP
» -
PIN
goes on: «
».
for 3 seconds to save these settings.
BUTTON
once briefly.
W » -
Y ASH
to start the individually set washing
~ ~
125
/ -
RPM PRE WASH
.
. » - .
BUTTON
.
BUTTON
/ 30 °C / 1400
goes on: «
FUNCTION
Y
)
/ -
RPM PRE
».