Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3 Set the programme « D
machine is now switched on and in
4 Press the « S
TART

7.6 "Frozen" appliance

I
F THE AMBIENT TEMPERATURE IS LOWER THAN
HAS BEEN FROZEN
1. Disconnect the appliance from the mains.
2. Close the water tap.
3. Wash the tap with warm water (approx. 50 °C) so you can take the water inlet
hose off. You can also use a warm cloth (approx. 50 °C) at the junction between
the water tap and the water inlet hose (B) to loosen the water inlet hose (s. fig.
below).
A
B
C
4. Take off the hose and immerse it in warm water (approx. 50 °C / s. fig. below).
5. Pour warm water (2 - 3 litres / approx. 50 °C) into the drum and wait approx. 10
minutes (s. fig. below).
RUM CLEAN
STANDBY MODE
/ P
» -
AUSE
BUTTON
,
PROCEED AS DESCRIBED BELOW
J
UNCTION BETWEEN TAP AND WATER INLET HOSE
~
» using the
ROTARY KNOB
.
to start the programme.
0
C
0
T
AP
W
ATER INLET HOSE
~
147
. The washing
AND THE APPLIANCE
.

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis