Switching The Led Strip On / Off; Maintenance And Cleaning - LIVARNO LUX IAN 345123 2004 Montage-, Bedienungs- Und Sicherheitshinweise

Stick the cable holder
the sensor
Insert the mains adapter
Your light is now ready to use.

Switching the LED strip on / off

Press the ON / OFF button on the remote control
LED strip
3
Note: The OFF button on the remote control
to temporarily switch off the LED strip
adapter
2
permanently.
Note: The LED strip
programme that was set.
For a comprehensive overview of all 166 programmes,
please scan the QR code.

Maintenance and cleaning

Disconnect the lights from the power supply before performing any
work on the LED strip
socket to do so.
Do not use solvents, benzene or similar substances. They could
damage the light.
Use a dry, lint-free cloth to clean the LED strip
36 GB/IE
to the desired location and then clamp
14
in the cable holder
5
2
on or off.
from the plug socket to switch off the LED strip
has a memory function. This saves the last
3
DANGER TO LIFE BY ELECTRIC SHOCK!
. Unplug the mains adapter
3
(see Fig. D).
14
into the plug socket.
. Unplug the mains
3
to switch the
4
is only suitable
4
3
from the
2
.
3