Operation; Switching The Lamp On Or Off; Switching The Alarm On And Off; Activating The Alarm - LIVARNO LUX 55154 Bedienungs- Und Sicherheitshinweise

8. Press the Select button
A beep will sound and the first field in the date
display will flash.
9. Use the / button
10. Press the Select button
A beep will sound and the second field in the
date display will flash.
11. Use the / button
12. Press the Select button
The date and time have been set.
The symbol in the function display will stop
flashing and stay on.
Note: You can change the unit of temperature
(° C or ° F) at any time by pressing the
ton .
6
You can switch between the 12-hour and
24-hour mode at any time by pressing the
button .
6

Operation

Use the flexible lamp head
LED lamp.

Switching the lamp on or off

The lamp has three brightness settings:
1. Touch the touch switch
on the LED lamp
1
2. Touch the touch switch
to increase the brightness.
3. Touch the touch switch
increase the brightness more.
4. Touch the touch switch
switch the LED lamp

Switching the alarm on and off

Activate the alarm (see "Activating the alarm").
The alarm will sound at the set time.
Touch any button (
of the lamp to switch off the alarm sound.
With the snooze function activated, the
symbol will appear in the function display. The
20 GB/IE
to confirm the setting.
5
to set the current month.
6
to confirm the entry.
5
to set the current date.
6
to confirm the entry.
5
but-
to adjust the
2
once to switch
8
.
a second time
8
a third time to
8
a fourth time to
8
off.
1
, , ) on the bottom
4 5 6
alarm will sound again after the set snooze
time (max. 2 x).

Activating the alarm

Press the Mode button
mode to alarm mode. A beep will sound and the
symbol will appear in the function display
The time and date display
15
rent alarm time or current date, respectively.
If applicable, press the
times to activate or disable the respective function:
• symbol appears in the function display:
The alarm function is activated.
• symbol also appears in the function display:
The snooze function is activated.
Press the Mode button
mode to time mode. A beep will sound. The
symbol will go out and in addition to the
symbols for the respective selected functions, the
will appear in the function display.
If no changes are made for 60 seconds, the LC
display will automatically revert from alarm
9
mode to time mode.
Setting the alarm time, snooze
time and alarm sound
1. If applicable, press the Mode button
switch from time mode to alarm mode. A beep
will sound and the
function display . The time display
14
show the current alarm time.
2. Press the Select button
A beep will sound, the top line in the time dis-
play will flash, and the
the function display.
3. Use the / button
4. Press the Select button
A beep will sound, the bottom line in the time
display will flash, and the
in the function display.
5. Use the / button
6. Press the Select button
to switch from time
4
14
show the cur-
16
/ button several
6
to revert from alarm
4
/
to
4
symbol will appear in the
will
15
:
5
symbol will flash in
to set the hour.
6
to confirm the setting.
5
symbol will flash
to set the minute.
6
to confirm the setting.
5
.