Initial Use - LIVARNO LUX IAN 345123 2004 Montage-, Bedienungs- Und Sicherheitshinweise

WEAR PROTECTIVE GLOVES!
Leaked or damaged batteries / rechargeable batteries can cause
burns on contact with the skin. Wear suitable protective gloves at
all times if such an event occurs.
In the event of a leakage of batteries / rechargeable batteries,
immediately remove them from the product to prevent damage.
Only use the same type of batteries / rechargeable batteries. Do
not mix used and new batteries / rechargeable batteries.
Remove batteries / rechargeable batteries if the product will not be
used for a longer period.
Risk of damage of the product
Only use the specified type of battery / rechargeable battery!
Insert batteries / rechargeable batteries according to polarity marks
(+) and (-) on the battery / rechargeable battery and the product.
Clean the contacts on the battery / rechargeable battery and in
the battery compartment before inserting!
Remove exhausted batteries / rechargeable batteries from the
product immediately.

Initial use

Remove all packaging materials before first use.
Never connect the LED strip to the mains power supply while it is
in the packaging and rolled up.
Note: Ensure that a plug socket is located in close proximity to
the installation area.
GB/IE 33