LIVARNO LUX IAN 345123 2004 Montage-, Bedienungs- Und Sicherheitshinweise Seite 30

Never allow the live power leads and contacts to come into con-
tact with water or other liquids.
Never open any of the components of the electrical equipment or
insert any objects into the same components. This will pose a risk
of fatal injury from electric shock.
The lamp's illuminant is not replaceable. The entire lamp needs to be
replaced if the illuminant reaches the end of its service life.
Do not use the LED strip if it is covered with objects or is inlaid into
a surface.
Do not install the lamp on damp or conductive surfaces.
This LED strip must not be connected electronically with other LED
strips.
Do not secure with sharp staples or nails.
Always unplug the mains plug from the socket before assembly,
disassembly or cleaning.
Never catch hold of the mains plug or the LED strip with wet hands.
Only use the individual parts supplied, otherwise all warranty
claims will become invalid.
Do not connect this rope light to another manufacturer´s product.
Interconnection shall be made only by the use of the supplied con-
nectors. Any open ends must be sealed-off before use.
Do not use the rope light when covered or crecessed into a surface.
Never connect the LED strip to the power supply while it is in the
packaging. Lay out the item completely before you connect it to
the power supply. Lay out the item completely before you connect
it to the power supply.
For some people, this can lead to epileptic seizures or distur-
bances of consciousness if they are exposed to certain flashes or
light effects. Immediately visit a doctor if you experience epileptic
symptoms.
30 GB/IE