Initial Use; Shortening The Led Strip; Installing The Led Strip; Switching The Led Strip On / Off - LIVARNO LUX 313282_1904 Montage-, Bedienungs- Und Sicherheitshinweise

Initial use / Installing the LED strip / Maintenance and cleaning / Disposal

Initial use

Remove all packaging materials before first use.
Do not connect the LED strip to the mains while
it is still in its packaging or while it is rolled up.

Shortening the LED strip

The LED strip can be trimmed.
DANGER TO LIFE BY
ELECTRIC SHOCK!
Disconnect the lights from the power supply before
performing any work on the LED strip
the mains adapter from the socket to do so.
1
Choose the desired LED strip
Note: Ensure that you cut the LED strip
the right place. The cutting point lies exactly be-
tween the plus and minus pole and is marked
with a black line (see Fig. C).
Shorten the LED strip
Be sure to cover the open end of the LED strip
with the adhesive strip

Installing the LED strip

Note: Ensure that the installation area is clean,
grease-free and dry. Otherwise the functionality
of the adhesive strip may be impaired.
Note: Ensure that a plug socket is located in close
proximity to the installation area.
Choose a suitable installation area (window etc.).
Remove the protective foil from the reverse side
of the LED strip
2
Stick the LED strip
2
onto the installation area and press it on firmly.
Remove the protective foil from the reverse side
of the cable hold
3
Stick the cable holder
position.
Insert the supply cable
Plug the mains adapter
Your light is now ready to use.
. Unplug
2
length.
2
2
using a pair of scissors.
2
before use (see Fig. E).
6
(see Fig. B).
with the adhesive strip
(see Fig. D).
onto the desired
3
in the cable holder
5
into the socket.
1

Switching the LED strip on / off

Use the ON / OFF cord switch
LED strip
2

Maintenance and cleaning

Use the ON / OFF cord switch
LED strip
2
ELECTRIC SHOCK!
Disconnect the lights from the power supply be-
fore performing any work on the LED strip
Unplug the mains adapter
to do so.
at Do not use solvents, benzene or similar substances.
They could damage the light.
Use a dry, lint-free cloth to clean the LED strip
Insert the mains adapter
Your light is now ready to use.
2

Disposal

Observe the marking of the packaging
materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
.
3
to switch the
4
on or off.
to switch the
4
on or off.
DANGER TO LIFE BY
from the socket
1
into the plug socket.
1
GB/IE/NI
.
2
.
2
9