Initial Use; Checking The Lamp And The Delivery Contents; Operation; Setting Up The Lamp - LIVARNO LUX 314592 Bedienungs- Und Sicherheitshinweise

Keep the lamp, the mains adapter and the USB
connection cable away from open fire and hot
surfaces.
Make sure that the USB connection cable does
not become a tripping hazard.
Do not kink the USB connection cable or run it
over sharp edges.
Only use the lamp indoors. Never user the lamp
in wet rooms or in rain.
Never store the lamp where it can fall into a
bath or washbasin.
Never reach for an electrical appliance which
has fallen into water. Instead, immediately
unplug the mains adapter from the socket.
If you are not using the lamp, you are cleaning
it or if it malfunctions, always switch off the
lamp and unplug the mains adapter from the
mains socket.
LIFE AND RISK OF ACCIDENT
FOR INFANTS AND CHILDREN!
This product may be used by children aged
8 and over as well as by persons with physical,
sensory or mental impairments or lacking expe-
rience and knowledge provided that they are
supervised or instructed in the safe use of the
product and that they understand the associated
risks. Do not allow children to play with the
product. Cleaning and user maintenance must
not be performed by children without supervision.
Do not allow children to play with the lamp.
Do not allow children to play with the packaging
film. Children can get entangled in the packag-
ing whilst playing and suffocate.
Keep children under 8 years of age away from
the lamp.
Never leave the lamp unattended whilst it is
switched on.
NOTE: RISK OF DAMAGE!
The lamp may be damaged if used improperly.
Place the lamp on an easy to access, level, dry,
heat-resistant and sufficiently stable work surface.
Do not place the lamp at the edge of the work
surface.
8 GB/IE/NI/CY
DANGER TO
Be careful when opening the packaging:
1. Remove the lamp from the packaging.
2. Check that all items included in the delivery
3. Check to see if the lamp or the individual parts
1. Place the lamp on a level, stable surface.
2. Turn the lamp head
3. Plug the USB connection cable
To prevent a heat build-up, do not place the lamp
directly against a wall or under wall cabinets
or similar.
Never place the lamp on or near hot surfaces
(hobs, etc.).
Do not allow the USB connection cable to come
into contact with hot parts.
Never expose the lamp to high temperatures
(radiators, etc.) or the weather (rain, etc.).
Never immerse the lamp in water to clean, or
use a steam cleaner. The lamp may otherwise
be damaged.
Never put the lamp in the dishwasher. This
would break the lamp.
Discontinue use of the lamp if the plastic parts
of the lamp are cracked or deformed. Always
replace damaged parts with genuine spare
parts.

Initial use

Checking the lamp and the
delivery contents
contents are present (see diagram).
are visibly damaged. Do not use the lamp if
you detect any type of damage. Contact the
manufacturer using the service address stated.

Operation

Setting up the lamp

1
adapter and plug the mains adapter
6
into a properly installed socket, or plug the USB
connection cable into a device with a USB
5
port.
to the desired position.
into the mains
5
6