Charging Process - Parkside PMBSA 4 A1 Originalbetriebsanleitung

GB IE
and rain. Do not use
the charger outdoors.
Dirt and the entry of
water increase the risk
of electric shock.
g) Operate the charger
only with the appropri-
ate original batteries.
Charging other batter-
ies may result in inju-
ries and risk of fire.
h) Avoid mechanical dam-
age to the charger. This
can result in internal
short circuits.
i) Do not operate the
charger on a combusti-
ble surface (e.g. paper,
textiles). Risk of fire
due to heating during
charging.
j) In order to minimise the
risk of electric shock,
pull the charger plug
out of the socket prior
to cleaning it.
k) If the power cable
for this equipment is
damaged, it must be
replaced by the manu-
facturer, a customer
38
service agent of the
same or a similarly
qualified person in or-
der to prevent hazards.

Charging process

Do not expose the battery
to extreme conditions such
as heat and shocks. There
is a risk of injury caused
by leaking electrolyte
solution! In case of contact
with eyes or skin, rinse the
affected sites with water or
a neutralising agent and
seek medical attention.
The battery must only be
charged up in dry areas.
There is a risk of personal
injuries from an electric
shock.
• The device may only be
powered with SELV (Safety
Extra Low Voltage) as indi-
cated by the label on the
appliance.
• Charge the battery before
using it for the first time.