Herunterladen Inhalt Inhalt Diese Seite drucken

Correct Handling Of The Battery Charger; Charging Process - Parkside PABS 20-Li E6 Originalbetriebsanleitung

Akku-bohrschrauber 20 v
Vorschau ausblenden Andere Handbücher für PABS 20-Li E6:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
Correct handling of the
battery charger
• Keep the equipment away from
children and pets. Children
should be supervised in order
to ensure that they do not play
with the equipment.
• Only use chargers belonging
to the Parkside X 20 V TEAM
series to recharge the battery.
Risk of fire and explosion.
• Before each use, check the
charger, cable and plug and
have them repaired by quali-
fied professionals and only with
original parts. Do not use a
defective charger and do not
open it up yourself. This ensures
that the safety of the device is
maintained.
• Connect the charger only to a
socket with an earth. Ensure that
the mains voltage matches the
specifications on the charger rat-
ing plate. Risk of electric shock.
• Disconnect the charger from the
mains before closing or open-
ing connection to the battery/
power tool/device.
• Keep the charger clean and
away from wet and rain. Do
not use the charger outdoors.
Dirt and the entry of water in-
crease the risk of electric shock.
• The charger may only be used
with the corresponding re-
chargeable batteries of the
Parkside X 20 V TEAM series.
Charging other batteries can
lead to injuries and the risk of
fire.
• Avoid mechanical damage to
the charger. This can result in
internal short circuits.
• The charger must not be operat-
ed on or in the immediate vicin-
ity of flammable surfaces (e.g.
paper, textiles). Risk of fire due
to heating caused by charging.
• If the power cable for this equip-
ment is damaged, it must be
replaced by the manufacturer,
a customer service agent of the
same or a similarly qualified per-
son in order to prevent hazards.
• The battery of your device is
only partially pre-charged and
must be properly charged for the
first time before use. Connect the
charger to the mains and insert
the battery in the base.
• Pull the mains plug when the
battery is fully charged and
disconnect the battery from the
charger.
• Do not use the charger to
charge non-rechargeable bat-
teries. The device could become
damaged.

Charging Process

Do not expose the battery to
extreme conditions such as
heat or impact. Risk of injury
from escaping electrolytic so-
lution! After eye/skin contact,
rinse the affected areas with
water or a neutraliser and
consult a doctor.
Charge the battery in a dry
room only. Prior to attaching
the charger, check that the
battery's outer surface is
clean and dry. There is a risk
of injury due to electric shock.
GB
IE
19

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis