Safety Information; Graphical Symbols - Parkside PMBSA 4 A1 Originalbetriebsanleitung

GB IE
Output power ............ 21.6 W
Protection class ................
Protection type ................ IP20
The stated vibration emission
value was measured in accord-
ance with a standard testing
procedure and may be used
to compare one power tool to
another. The stated vibration
emission value may also be
used for a preliminary expo-
sure assessment.
Warning: The vibration
emission value may differ
during actual use of the power
tool from the stated value de-
pending on the manner in
which the power tool is used.
Try to keep the exposure to vi-
brations as low as possible. Ex-
amples of measures to reduce
vibration exposure are limiting
the working hours. For this pur-
pose all parts of the operating
cycle have to be considered
(for example, times when the
electric tool is switched off and
times when it is switched on but
running without any load).
30
Safety
II
information
Follow all safety instructions
when using the device.

Graphical symbols

Symbols on the device:
Read the instruction manu-
al carefully.
Do not dispose of de-
vices with a built-in
Li-Ion
battery in the household waste.
Graphical symbols on the
charger:
Read the instruction manu-
al carefully.
The charger is only suit-
able for use indoors.
Safety transformer – short-
circuit proof
Switch­mode power supply