Parkside PMBSA 4 A1 Originalbetriebsanleitung Seite 35

mended by the manufacturer.
Risk of fire if a charger that is
suitable for a specific type of
battery is used with other bat-
teries.
b) In the power tools, use only
the batteries designed for
the purpose. The use of other
batteries may result in inju-
ries and risk of fire.
c) Keep the unused battery
away from paper clips,
coins, keys, nails, screws
and other small metal ob-
jects, which could cause
bridging of the contacts.
A short circuit between the
battery contacts may cause
burns or fire.
d) If used incorrectly, liquid may
leak from the battery. Avoid
contact with this. In the event
of accidental contact, rinse off
with water. If the liquid gets
into eyes, seek medical as-
sistance. Leaking battery fluid
may cause skin irritations or
burns.
e) Do not use damaged or al-
tered batteries. Damaged or
altered batteries can be un-
predictable and lead to fire,
explosion or risk of injury.
f) Do not expose batteries to
fire or elevated tempera-
tures. Fire or temperatures
over 130 °C can cause an
explosion.
g) Follow all instructions for
charging and never charge
the battery or the battery-
powered tool outside the
temperature range stated in
the operating instructions. In-
correct charging or charging
outside the permitted tem-
perature range may destroy
the battery and increase the
risk of fire.
6) SERVICE
a) Have your power tool ser-
viced by a qualified repair
person using only identical
replacement parts. This will
ensure that the safety of the
power tool is maintained.
b) Never repair damaged bat-
teries. All battery repairs
should be carried out by the
manufacturer or authorised
GB IE
35