Parkside PMBSA 4 A1 Originalbetriebsanleitung Seite 33

or hearing protection used
for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to
power source and/or battery
pack, picking up or carry-
ing the tool. Carrying power
tools with your finger on the
switch or energising power
tools that have the switch on
invites accidents.
d) Remove any adjusting key
or wrench before turning the
power tool on. A wrench or
a key left attached to a rotat-
ing part of the power tool
may result in personal injury.
e) Do not overreach. Keep
proper footing and balance
at all times. This enables bet-
ter control of the power tool
in unexpected situations.
f) Dress properly. Do not wear
loose clothing or jewellery.
Keep your hair, clothing and
gloves away from moving
parts. Loose clothes, jewel-
lery or long hair can be
caught in moving parts.
g) If dust extraction and collec-
tion devices can be installed,
make sure that these are
connected and used correct-
ly. Use of dust collection can
reduce dust-related hazards.
h) Do not allow yourself to
be lulled into a false sense
of security and do not dis-
regard the safety rules for
power tools, even if you are
familiar with the power tool
after using it many times.
Careless action can lead to
serious injuries within a frac-
tion of a second.
4) POWER TOOL USE AND
CARE
a) Do not force the power tool.
Use the correct power tool
for your application. The
correct power tool will do
the job better and safer at
the rate for which it was de-
signed.
b) Do not use the power tool if
the switch does not turn it on
and off. Any power tool that
cannot be controlled with
GB IE
33