Mounting The Magnetic Sensor - Siko MSA213C Originalmontageanleitung

MSA213C
20 Installation
NOTICE
5
1
Fig. 2: Mounting of the magnetic tape
Mounting examples
The simple mounting procedure by means of a beveled magnetic tape as
shown in Fig. 3 can only be recommended for very protected environ-
ments. In a non-protected environment, there is the danger of peeling off.
Mounting approaches as shown in
such cases.
Optimum protection is provided by mounting in a groove as shown in
6. The groove should be deep enough so that the complete magnetic tape
will be embedded in it.
Fig. 3: Magnetic tape
beveled
Fig. 5: Magnetic tape screwed
from top

4.3 Mounting the magnetic sensor

Alignment of the magnetic sensor
` Take care that the magnetic sensor is aligned correctly in order to
ensure optimum sensing (see
MSA213C · Date 19.04.2021 · Art. No. 89792 · Mod. status 340/18
6
4
3
2
Fig. 4 Fig. 5
and
Fig. 4: Magnetic tape screwed
on the front
Fig. 6: Magnetic tape in groove
Fig. 7).
English
are more suitable in
Fig.