Identification; Installation; Mechanical Mounting - Siko MSA213C Originalmontageanleitung

MSA213C
18

Identification

CAUTION
CAUTION
NOTICE
NOTICE
External magnetic fields
External magnetic fields > approx. 3 ... 4 kA, (3.8 ... 5 mT) impair accu-
racy of measurement. Field intensities >150 kA/m (>190 mT) irreversibly
change the magnetization of the magnetic tape.
` Protect the magnetic sensor from impact by external magnets.
3 Identification
Please check the particular type of unit and type number from the identifi-
cation plate. Type number and the corresponding version are indicated in
the delivery documentation.
e. g. -
MSA213C 0023
The magnetic tape is identifiable by a consecutive imprint.
e. g.
MBA213 WT NNNNNN

4 Installation

4.1 Mechanical mounting

Magnetic sensor failure
` When mounting pay attention to the IP type of protection (see chap-
ter 8).
` Do not open the sensor yourself.
` Avoid blows to the unit.
` Do not modify the device in any way.
` The cable must be provided with strain relief. If necessary, use drag
chain or protective sleeve.
Loss of measured values
` The tolerances and distance dimensions must be observed over the
whole measurement length.
Exemplary sensor figures are valid for all sensor types unless described
separately.
MSA213C · Date 19.04.2021 · Art. No. 89792 · Mod. status 340/18
variant number
type of unit
batch number
material carrier tape
MBA type
English