Technical Data - Siko MSA213C Originalmontageanleitung

MSA213C

Technical data

• Prior to installation inspect the magnetic sensor for transport dam-
Maintenance
With correct installation according to chapter
requires no maintenance. Clean the surface of the magnetic tape with soft
cloth from time to time if it is very dirty.
Disposal
The magnetic sensor's electronic components contain materials that are
harmful for the environment and are carriers of recyclable materials at the
same time. Therefore, the magnetic sensor must be recycled after it has
been taken out of operation ultimately. Observe the environment protec-
tion guidelines of your country.
8 Technical data
Mechanical data
Housing
Sensor/band reading dis-
tance
Cable length
Cable sheath
Cable bending radius
Service life of cable
Weight
Electrical data
Operating voltage
Current consumption
Status display
MSA213C · Date 19.04.2021 · Art. No. 89792 · Mod. status 340/18
ages. Do not install damaged magnetic sensors.
zinc die-cast
≤0.8 mm
1 ... 20 m
PUR, suitable for drag-chain
use
28 mm
42 mm
5 million cycles
~0.05 kg
4.5 ... 30 V DC
7.5 ... 30 V DC
<200 mA
RGB-LED
4
the magnetic sensor
Additional information
(connection type E1)
10-core ø5.5 mm (E1, twisted
-0.4
in pairs)
static
dynamic
under the following test condi-
tions:
Travel range 4.5 m
Travel speed 3 m/s
Acceleration 5 m/s
2
Ambient temperature 20 °C ±5 °C
without cable
Additional information
reverse polarity protected (SSI +
BiSS/C)
reverse polarity protected (IOL)
plausibility error, distance warn-
ing, device status
English 25