Documentation; Safety Information; Intended Use; Identification Of Dangers And Notes - Siko MSA213C Originalmontageanleitung

MSA213C
16

Documentation

DANGER
1 Documentation
The following documents describe this product:
• The data sheet describes the technical data, the dimensions, the pin
assignments, the accessories and the order key.
• The mounting instructions describe the mechanical and electrical
installation including all safety-relevant requirements and the associ-
ated technical specifications.
• Software description of commissioning the magnetic sensor.
These documents can also be downloaded at
com/p/msa213c".

2 Safety information

2.1 Intended use

The sensor collects the absolute travel information of the encoded mag-
netic tape MBA213. The absolute position value can be read from an
upstream control unit with a resolution of 1 μm via encoder interface.
1. Observe all safety instructions contained herein.
2. Arbitrary modifications and changes to this magnetic sensor are for-
bidden.
3. Observe the prescribed operating and installation conditions.
4. Operate the magnetic sensor exclusively within the scope of technical
data and the specified limits (see chapter 8).
SSI and BiSS/C interface
Optional 2 analog signals (sin/cos) with 1 V
based applications.

2.2 Identification of dangers and notes

Safety notes consist of the signal symbol and a signal word.
Danger classes
Immediate danger that may cause irreversible bodily harm resulting in
death, property damage or unplanned device reactions if you disregard
the instructions given.
MSA213C · Date 19.04.2021 · Art. No. 89792 · Mod. status 340/18
"http://www.siko-global.
are available for control-
PP
English