HBM U10M Montageanleitung Seite 8

Safety instructions
of a force transducer can also cause damage to property or injury to persons in
the vicinity of the force transducer.
If force transducers are not used according to their designated use, or if the
safety instructions or specifications in the mounting and operating instructions
are ignored, it is also possible that the force transducer may fail or malfunction,
with the result that persons or property may be affected (due to the loads act­
ing on or being monitored by the force transducer).
The scope of supply and performance of the transducer covers only a small
area of force measurement technology, as measurements with (resistive) strain
gage sensors presuppose the use of electronic signal processing. In addition,
equipment planners, installers and operators should plan, implement and re­
spond to the safety
engineering considerations of force measurement technology in such a way as
to minimize residual dangers. Pertinent national and local regulations must be
complied with.
Conversions and modifications
The design or safety engineering of the transducer must not be modified with­
out our express permission. Any modification shall exclude all liability on our
part for any damage resulting therefrom.
Maintenance
U10M/U10S force transducers are maintenance-free.
Disposal
In accordance with national and local environmental protection, material recov­
ery and recycling regulations, old transducers that can no longer be used must
be disposed of separately and not with normal household waste.
If you need more information about disposal, please
contact your local authorities or the dealer from whom you purchased the prod­
uct.
6 U10M/U10S
A01385_06_YIC_06 HBM: public