HBM U10M Montageanleitung Seite 13

nected measuring device. Each measuring bridge has a separate TEDS in
the double bridge variant. See also Page 31.
6. Without adapter
You can purchase the force transducer without an adapter. The force trans­
ducer can then be directly screwed onto a structural element using the pitch
circle, see Fig. 3.1.
Fig. 3.1 U10M with adapter (left) and without adapter (right)
7. Plug protection
On request, we can fit plug protection, consisting of a rectangular tube
(round tube for nominal (rated) force 1.25 MN), so that the plug is protected
against
mechanical damage
8. Threaded connector or fixed cable
The standard version of the force transducer is
delivered with a bayonet connector. On request, a threaded connector or
fixed cable 6 m or 15 m long can be provided instead.
9. Force application part
On request, we can deliver the U10M with a force
application part mounted in the central thread, see Fig. 3.2 on Page 12.
U10M/U10S
Scope of supply and equipment variants
A01385_06_YIC_06 HBM: public
11