Deposits - HBM U10M Montageanleitung

Conditions on site
We recommend protecting the transducer against long-term exposure to mois­
ture and weather conditions.
6.3

Deposits

Dust, dirt and other foreign matter must not be allowed to accumulate suffi­
ciently to divert some of the measuring force onto the housing, thus distorting
the measured value (force shunt). The relevant areas are marked in Fig. 6.1.
The gap must remain free
Fig. 6.1 Deposits must not be allowed to form where marked.
16 U10M/U10S
A01385_06_YIC_06 HBM: public