General Application Instructions - HBM U10M Montageanleitung

General application instructions

4 General application instructions
The force transducers are suitable for measuring tensile and compressive
forces. They provide highly accurate static and dynamic force measurements
and must therefore be handled very carefully. Particular care must be taken
when transporting and installing the devices. Dropping or knocking the trans­
ducer may cause permanent damage.
U10M force transducers have a metric internal thread and U10S force trans­
ducers have an internal thread to UNF standard.
The permissible limits for mechanical, electrical and thermal stress are listed in
the Chapter "" on page 35. It is essential to take these limits into account when
planning the measuring set-up, during installation and, ultimately, during opera­
tion.
U10M/U10S 13
A01385_06_YIC_06 HBM: public