Maintenance Intervals; Service Information; Storage; Disposal And Recycling - Parkside PBKS 53 A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

13.10 Maintenance intervals

The figures given here are based on normal operating conditions. In the event of more difficult conditions, such as strong dust generation and
longer daily working hours, the given intervals are to be reduced correspondingly.
Appliance part Action
Chain lubrication Checking
Saw chain (17) Check and note
sharpness
Check chain
tension
Sharpen
Guide rail (16) Check (wear,
damage)
Cleaning
Replace

13.11 Service information

Please note that the following parts of this product are sub-
ject to normal or natural wear and that the following parts are
therefore also required for use as consumables.
Wear parts*: Chain, Guide bar, Chain sprocket, Chain oil, En-
gine oil, Claw Stop, Chain catch, spark plug, air filter, fuel filter,
chain oil filter
* Not necessarily included in the scope of delivery!

14. Storage

• Always use the cover for the guide rail (27) during storage.
• Always clean and maintain the appliance before storage,
see section "Cleaning and maintenance".
• Switch off the chainsaw before moving it anywhere, even
short distances. Protect the machine during transport (also in
vehicles) against tipping over to prevent fuel loss, damage
or injuries.
• Empty the oil and fuel tanks using a suction pump.
m WARNING
Do not remove the fuel in enclosed rooms, in the vicinity of fire
or while smoking. Gas vapours can cause explosions or fire.
• Start the engine and leave it running until the remaining pet-
rol has been used up.
Before start-
Weekly
ing work
X
X
X
X
X
In the event of In the event of
an error damage
X
X

15. Disposal and recycling

The equipment is supplied in packaging to prevent it from being
damaged in transit. The raw materials in this packaging can be
reused or recycled.
The equipment and its accessories are made of various types
of material, such as metal and plastic. Defective components
must be disposed of as special waste. Ask your dealer or your
local council.
The packaging is wholly composed of environment-
ally-friendly materials that can be disposed of at a
local recycling centre.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
electrical devices.
As required
X
X
GB/IE 33