Maintenance Intervals; Ordering Replacement Parts - Parkside PKSA 20-Li A1 Originalbetriebsanleitung

Maintenance intervals

The figures given here are based on normal operating conditions. In more difficult conditions, such as strong
dust generation and longer daily working hours, the given intervals are to be reduced correspondingly.
Tool part
Chain lubrication
Saw chain
Guide rail

Ordering replacement parts

Ordering replacement parts
The following information should be provided when ordering replacement parts:
■ Type of tool: Cordless chain saw
■ Item number of the tool: IAN 327520_1904
■ Tool ID number: PKSA 20-Li A1
NOTE ON THE SAW CHAIN
► Recommended Oregon saw chain:
–
Oregon 91 P040X/E (e.g. available in DIY stores)
► Pay close attention to the following specifications when purchasing from alternative suppliers:
–
Chain pitch: 0,375" (9,525 mm)
–
Drive link thickness (groove width): 1.27 mm (0.050")
–
No. of chain links: 40
GENERAL INFORMATION
► Replacement parts not listed can be ordered via our service hotline.
► Recommended Oregon guide rails: Oregon 10" 100NDEA04
► For an exchange, only the specified guide rails and saw chains may be used. Unlisted or non-permis-
sible combinations may lead to injuries and/or damage to the tool.
Current prices and information are available at
www.kompernass.com
│ GB │ MT
■ 102
Action
Checking
Check and note
sharpness
Check chain tension
Sharpen
Check (wear,
damage)
Cleaning
Replace
Before Weekly
starting
work
X
X
X
X
X
In the In the
event of event of
an error damage
X
X
PKSA 20-Li A1
As required
X
X