Introduction; Scope Of Delivery; Intended Use; Safety Instructions - Parkside PBKS 53 A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

1. Introduction

MANUFACTURER:
Yulong Safety Tools Manufacture Co., Ltd.
NO, 361 Xinye Street, Chengbei Industry Zone,
Jin Hua, Zhejiang,
China
IMPORTER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope you enjoy using the accessory.
NOTE:
According to the applicable product liability laws, the manu-
facturer of the accessory does not assume liability for damages
to the accessory or damages caused by the accessory that
occurs due to:
• Improper handling
• Non-compliance of the operating instructions
• Repairs by third parties, not authorized service technicians
• Application other than specified
Please observe the following:
Read through the complete text in the operating instructions be-
fore assembling and using the accessory.
The operating instructions are intended to help the user to be-
come familiar with the accessory and take advantage of the ap-
plication possibilities in accordance with the recommendations.
The operating instructions contain important information on how
to use the accessory safely, professionally and economically,
how to avoid danger, costly repairs, reduce downtimes and how
to increase reliability and service life of the accessories.
In addition to the safety regulations in the operating instruc-
tions, you have to meet the applicable regulations that apply
for the use of the accessory in your country.
Keep the operating instructions package with the accessory at
all times and store it in a plastic cover to protect it from dirt and
moisture. Read the instruction manual each time before using
the accessory and carefully follow its information.
In addition to the safety instructions contained in this operating
manual and the specific regulations of your country, the techni-
cal rules generally accepted for the use of accessories of the
same type must be observed.
We accept no liability for damage or accidents which arise
due to non-observance of these instructions and the safety in-
formation.

2. Scope of delivery

• 1 pair of safety goggles
• 1 set of ear muffs
• Translation of original operating manual

3. Intended use

The accessory is allowed to be used only for its prescribed
purpose. Any other use is deemed to be a case of misuse. The
user/operator and not the manufacturer will be liable for any
damage or injuries of any kind resulting from such misuse.
An element of the intended use is also the observance of the
safety instructions as well as the assembly instructions and op-
erating information in the operating manual.
In addition, the applicable accident prevention regulations
must be strictly observed.
Other general occupational health and safety-related rules and
regulations must be observed.
The liability of the manufacturer and resulting damages are ex-
cluded in the event of modifications of the accessory.
Please note that the accessory has not been designed for use
in commercial, trade or industrial applications. Our warranty
will be voided if the accessory is used in commercial, trade or
industrial businesses or for equivalent purposes.
Safety goggles
The safety goggles are designed for eye protection.
The product complies with EN 166, safety class F and optical
grade 1.
The protective glass is clear. Safety class F means that the prod-
uct has high resistance to impacts from small particles with low
energy and a high speed of 45 m/s.
If the lenses and wearing parts do not have the same abbre-
viations S, F, B and A, the entire eye protection device must
be assigned the lower range of use. For extremely sensitive
persons, skin contact with certain materials may cause allergic
reactions under certain circumstances. No spare parts or ac-
cessories are available for these safety goggles. If the safety
goggles are damaged, do not use them any more. If the safety
goggles are worn over prescription glasses, mechanical effects
(e.g. impacts) can be transmitted and thus represent a hazard.
If mechanical protection at extreme temperatures is required,
the eye protection device must bear the additional marking T
(e.g. FT, BT, AT). Otherwise, the eye protection device may only
be used at room temperature to protect against high velocity
particles.
Ear muffs
The ear muffs protect the wearer against noise and distracting
sounds.
The ear muffs cover a size range from "medium" to "large"
and fit most users.

4. Safety instructions

In these operating instructions, we have used the following sym-
bol to mark sections concerning your safety: m.
m WARNING! Read all safety warnings and all
instructions.
Save all warnings and instructions for future
reference.
GB/IE 7