Locating A Handset (Paging) - Unify OpenScape DECT Phone S6 Base Bedienungsanleitung

Multiple handsets
¤
. . . use to select
OK . . . possible options:
Change active base station:
¤
Change name of a base station:
¤
De-registering the handset
¤
. . . use to select
Handset OK . . . the handset being used is selected
handset if desired OK . . . enter system PIN if desired
with Yes
If the handset is still registered to other bases, it switches to the base with the best reception
(Best Base).

Locating a handset (Paging)

¤
Briefly press the Registration/paging key on the base station.
All handsets will ring at the same time (paging), even if ringtones are
switched off.
Ending the search
¤
Briefly press the registration/paging key on the base station
or Press the End call key
or Press the display key Silence on the handset
or No action. After approx. 30 seconds, the paging call will end
automatically.
Changing the handset name and internal number
When registering multiple handsets, they will automatically be assigned the names INT 1,
INT 2 etc. Each handset will automatically be assigned the lowest unassigned internal number.
The internal number is shown as the name of the handset on the display e.g. INT 2. You can
change the names and the numbers of handsets. The name must not exceed 10 characters in
length.
116
Settings OK Registration
. . . use or Best Base to select base station
( = selected)
Best Base: The handset chooses the base station with the best
reception as soon as it loses connection to the current base station.
. . . use to select a base station
Name change name Save
Settings OK Registration
on the handset
OK Select Base
Select
Select ( = selected)
OK De-register
. . . use to select a different
OK . . . confirm de-registration
Paging
Silence