Dialling From The Call List; Incoming Calls - Unify OpenScape DECT Phone S6 Base Bedienungsanleitung

¤
¤
Delete all entries:
Set automatic line seizure:
¤

Dialling from the call list

The call lists ( p. 99) contain the most recent accepted, outgoing and missed calls.
¤
. . . use to select
use to select an entry
The call lists can be displayed directly by pressing the display key Calls if the relevant
function has been assigned to the display key.
The Missed calls list can also be opened by pressing the Message key
Enter a dial pause when dialling
¤
Press and hold the hash

Incoming calls

An incoming call is indicated by ringing, by a display on the screen and by the flashing Talk /
Handsfree key ( / ).
Accept a call:
•
Press the Talk key or
•
If Auto Answer is activated:
•
Accept a call on the headset
Switch off ringtone: Silence . . . the call can be accepted for as long as it is shown on the
display
Information about the caller
The caller's number is sent (
The caller's phone number is displayed.
If the caller's number is saved in the local directory, the name is displayed.
Delete entry OK
Delete List OK
Automatic Redial OK . . . the dialled number is automati-
cally dialled at fixed intervals (at least every 20 secs). The handsfree
key flashes, "open listening" is activated.
The participant answers: Press the Talk key
is terminated
The participant does not answer: The call is interrupted after
around 30 secs. The function is terminated after pressing any key
or after ten unsuccessful attempts.
Call Lists OK . . . use
Press the Talk key
key. A P is shown on the display
Accept
Remove the handset from the charging cradle
p. 25).
Making calls
. . . the function
to select a list OK . . .
.
91