Unify OpenScape DECT Phone S6 Base Bedienungsanleitung Seite 121

Large font
Show text and icons in call lists and in the directory in a larger size in order to improve legibility.
Only one entry is shown in the display and names are abbreviated if necessary.
¤
. . . use to select
Font Change ( = on)
Colour scheme
You can choose from a range of colour combinations for the display.
¤
. . . use to select
Colour Schemes OK
Select ( = selected)
Display backlight
The display backlight always illuminates when the handset is taken out of the base station/
charging cradle or when a key is pressed. Any digit keys that are pressed appear on the display
for pre-dialling.
Switch the display backlight on/off when in idle status:
¤
. . . Use to select
Display Backlight
Out of Charger / In Talk State)
The handset's standby time may be significantly reduced if the display backlight is
switched on.
Keypad illumination
The keypad has 5 levels of brightness to choose from.
¤
. . . use to select
Illumination OK . . . use
Activating/deactivating automatic keypad lock
Automatically lock the keypad when the handset has been in idle status for around 15 seconds.
¤
. . . use to select
Keypadlock Change (
Assigning the Functions key
Assign one of the following functions to the Functions key in the
top left of the handset.
QuickDial The phone number assigned to the key is dialled.
Settings OK Display & Keypad
Settings OK
. . . use to select the desired colour scheme
Settings OK
OK Use to select when the setting is applied (In Charger /
Select in each case with
Settings OK
to select Brightness (1 - 5)
Settings OK
= on)
Handset
OK
Display & Keypad OK
Display & Keypad OK
On or Off Save
Display & Keypad OK
Save
Display & Keypad OK
Large
Key
Auto
121