Locating A Handset (Paging) - Unify OpenScape DECT Phone S5 Base Bedienungsanleitung

Multiple handsets
Registering a handset to multiple base stations
Your handset can be registered to up to four base stations. The active base station is the base
station to which the handset was last registered. The other base stations remain saved in the list
of available base stations.
¤
. . . use
Basisauswahl OK . . . possible options:
Change active
base station:
Change name of a base station:
De-registering the handset
¤
. . . use
Mobilteil abmelden
different handset if desired
istration with Ja
If the handset is still registered to other bases, it switches to the base with the best reception
(Beste Basis).

Locating a handset (Paging)

¤
Briefly press the Registration/paging key on the base station.
All handsets will ring at the same time ("paging"), even if ringtones
are switched off.
Ending the search
¤
Briefly press the registration/paging key on the base station
or Press the End call key
or Press the display key Ruf aus on the handset
or No action. After approx. 30 seconds, the paging call will end
automatically.
108
to select Einstellungen
¤
. . . use or Beste Basis to select base station
( = select)
Beste Basis: The handset chooses the base station with the best
reception as soon as it loses connection to the current base station.
¤
. . . use to select a base station
Name change name
to select Einstellungen
OK . . . the handset being used is selected
OK . . . enter system PIN if desired
on the handset
OK Anmeldung
Auswahl (
Sichern
OK Anmeldung
. . . use
OK
OK
Auswahl
= selected)
OK
to select a
. . . Confirm de-reg-
Pagingruf
Ruf aus