Auto Answer - Unify OpenScape DECT Phone S6 Base Bedienungsanleitung

Warning tone when there are fewer than 10 minutes of talktime remaining
(every 60 seconds):
¤
Warning tone when the handset is moved out of range of the base station:
¤
¤
Save settings:

Auto answer

When Auto answer is enabled, the handset accepts an incoming call as soon as it is removed
from the charging cradle.
¤
. . . use to select
Change ( = activated)
Regardless of the Auto Answer setting, the connection ends as soon as you place the handset
back in the charging cradle. Exception: Press and hold the handsfree key
2 seconds while placing the handset in the charging cradle.
Fast access to numbers and functions
Assigning a number to digit keys (quick dial)
It is possible to assign a number from the directory to the keys
A number has not been assigned to the digit key.
¤
Press and hold the digit key
or
¤
Briefly press the digit key
The directory opens.
¤
. . . use to select an entry
the entry is saved to the digit key
If the entry in the directory is deleted later, this will not affect the assignment of the
digit key.
Dialling a number
¤
Press and hold the digit key . . . the number is dialled immediately
or
¤
Briefly press the digit key . . . the number/name (possibly in abbreviated form) is shown on
the left display key . . . press the display key . . . the number is dialled
Battery . . . use to select On or Off
Out of Range: . . . use
Save
Settings OK
Press the display key QuickDial
OK . . . use to select a number if necessary
Handset
to select On or Off
Telephony OK Auto Answer
for a further
and to .
OK . . .
125