Unify OpenScape DECT Phone S6 Base Bedienungsanleitung Seite 126

Handset
Changing the digit key assignment
¤
Briefly press the digit key
Change the assignment:
¤
Delete the assignment:
¤
Assigning display keys / Changing assignments
The left and right display keys have a function preset by default when in idle mode. The key can
be re-assigned.
¤
Press and hold the left or right display key in idle status . . . the list of possible key assign-
ments is opened . . . Use
key is changed
Possible functions: Alarm Clock, Redial, Handset Directory . . . More functions are available in
More Functions...
Starting a function
With the telephone in idle status:
Changing the handset PIN
The handset is protected against unauthorised use by a PIN. The handset PIN must be entered
e. g. when switching off the keypad lock.
Change the handset's 4-digit PIN (default setting: 0000):
¤
. . . use to select
OK . . . use to enter the current PIN
OK
Resetting a handset
Reset any individual settings and changes that you have made.
¤
. . . use to select
OK Yes . . . the handset's settings are reset
The following settings are not affected by a reset
•
Registration of the handset to the base station
•
Date and time
•
Directory entries and call lists
Resetting the handset to the default settings
Reset all settings and personal information.
126
Change . . . the directory is opened . . . possible options:
. . . use to select an entry
required OK
Clear Key
to select the function
Briefly press . . . the assigned function is executed
Settings OK
OK . . . use
Settings OK System
OK . . . select a number if
OK . . . The assignment of the display
System OK Handset PIN
to enter the new handset PIN
OK Handset Reset