Repeater - Unify OpenScape DECT Phone S6 Base Bedienungsanleitung

¤
. . . the list of handsets is opened, the current handset is highlighted with <
use to select a handset . . . possible options:
¤
Edit name:
¤
Edit number:

Repeater

A repeater increases the receiving range between the Gigaset handset and the base station.
The registration procedure for a repeater depends on the version of the repeater being used.
•
Repeater without encryption, e.g. Gigaset repeater prior to Version 2.0
•
Repeater with encryption, e.g. Gigaset repeater later than Version 2.0
Further information about the Gigaset repeater can be found in the repeater user guide and at
www.gigaset.com.
Repeater without encryption
Activate Maximum Range/deactivate No Radiation
¤
. . . use to select
Range Change ( = activated)
Deactivate encryption
¤
. . . use to select
Change ( = deactivated)
Registering a repeater
¤
Connect the repeater to the mains power supply
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
It is possible to register more than one Gigaset repeater.
Repeater with encryption
Encryption is activated (default setting).
Registering a repeater
¤
Connect the repeater to the mains power supply
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
Up to 2 repeaters may be registered.
The ECO DECT function Maximum Range is activated and the No Radiation function is
deactivated. The settings cannot be changed whilst the repeater is registered.
Options Rename OK
name . . . use to enter a new name
Options Edit Handset No.
number Save
Settings OK
No Radiation
Settings OK System
Press and hold the Registration/paging
Press and hold the Registration/paging
Repeater
. . . use to delete the current
OK
OK . . . use to select a
ECO DECT OK Maximum
Change ( = deactivated)
OK Encryption
. . .
117