Water Connection - hanseatic HWD86W114BE Gebrauchsanleitung

Page EN-36 Set-up and connection

Water connection

~ 145 cm
~ 95 cm
Creating a water drain
CAUTION!
Risk of scalding!
The suds can become very hot and may
cause burns upon contact.
■ Fix the water outlet hose to the sink
or bath to prevent it from slipping
due to the recoil caused by pumping.
■ For drains, make sure that the cross
section of the discharge pipe is great
enough that the drain cannot over-
fl ow.
NOTICE
Risk of damage!
Improper handling of the appliance
can lead to water damage.
■ Do not extend the water outlet hose
or replace it with another hose.
■ Make sure that the water outlet hose
is not bent or twisted.
~ 95 cm ~ 140 cm
~ 95 cm
~ 150 cm
■ Make sure that the curvature of the
water outlet hose is at least 60 cm
(max. 100 cm) above the ground to
ensure the water drain functions per-
fectly.
■ Ensure that the water outlet hose is
in the retaining clips on the back of
the appliance so that the curvature
always remains above the waterline.
■ Make sure that the end of the hose is
not submerged in the pumped water.
The water outlet hose (11) can be fixed in two
ways:
– Fixing with a hose holder for self-installa-
tion.
– Fixing to an appliance connection nozzle
directly on the siphon by a specialist.