hanseatic HWD86W114BE Gebrauchsanleitung Seite 87

6. Set the cycle selector (1) to the cycle
"Cotton".
7. Press the button (4).
8. The wash cycle begins. The display
shows the remaining cycle time, as well
as the progress of the wash cycle. After
the cycle has finished, "End" will appear
on the display.
9. Wait until the locking time is over and the
appliance door will be released with a
click. Open the appliance door and pull
the dispensing drawer out slightly so that
the washer-dryer can dry off inside.
10. Press the button (3) to switch off the
appliance.
11. Disconnect the mains plug from the
socket.
12. Close the valve.
Start-up is now finished.
Set-up and connection
Page EN-39