hanseatic HWD86W114BE Gebrauchsanleitung Seite 81

2. With the assistance of another person, tilt
the appliance forward slightly to allow any
residual water to drain from the appliance.
3. Replace the lint trap and screw it clock-
wise all the way in.
4. Put the shutter (15) back into position.
Make sure that the rectangular opening in
the cover is at the top.
5. Unscrew the water inlet hose (12) from
the tap and remove the water outlet hose
from the bathtub or siphon to drain any
residual water.
Care and maintenance
Page EN-33