Inhaltsverzeichnis
Werbung
Washing/drying process
Before getting started
– Read the chapter "Safety" from page EN-4.
– Prepare the appliance as described in
chapter "Set-up and connection" from
page EN-34.
– Properly secure the water outlet hose (11)
and the water inlet hose (12).
Starting the cycle
(1)
Waschen & Trocknen
Individuell
vi
id
d
Express 15'
Waschen & Trocknen 60'
20 °C
Baumwolle
Startzeit-
Mix
Wolle
Vorwahl
Synthetik
Feines
Temperatur
Intensiv
Waschen & Trocknen n n
Trocknen
ECO 40–60
Schleudern
Auffrischen
Spülen & Schleudern
Schleudern
1. Load the laundry (see "Loading laundry"
on page EN-17).
2. Press the
button (3) to switch the appli-
ance on.
3. Open the valve completely.
4. Select the desired cycle using the cycle
selector (1).
5. Make changes if necessary:
– To adjust the temperature, press the
"Temperature" button (21) repeatedly
until the desired value is shown in the
display (5).
Depending on the cycle you can set a
temperature of
20
°C or
°C. If -- is displayed, the
60
90
laundry is being washed cold.
– To adjust the spin speed, press the
"Spin" button (20) repeatedly until the
desired value is shown next to the sig-
nal
.
Depending on the cycle, you can set a
spin speed of
,
600
. If no spin speed is displayed, no
1400
spin cycle will take place.
– To adjust the dryness level, press the
"Dryness level" button (17) repeatedly
until the desired value is shown in the
display.
(3)
Trockengrad
Ein/Aus
Funktionen
(4)
Auswahl
Start/Pause
Nachlegen
°C
°C,
°C,
, 30
40
,
,
or
800
1000
1200
Washing/drying process
– To set one or several additional func-
tions, press the "Functions" button (18)
until the desired function is marked and
confirm with the "Selection" button (19).
6. Press the
button (4).
– The cycle starts.
– The appliance door is locked, the display
shows the signal
– The remaining cycle time is displayed.
– The cycle sequence is displayed using
the signals
,
,
– After the cycle starts, the settings can no
longer be changed. If you want to inter-
rupt or change a cycle, see "Cancelling/
modifying a cycle" on page EN-20.
If you have selected a cycle with drying
function, the spin speed and the cycle
duration will be automatically set up to
improve the drying effect.
Page EN-19
.
and
.
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
