Setting The Steering Wheel Position; Refuelling - Kärcher MC 250 Originalbetriebsanleitung

Headrest
7
Pull out or push in for height adjustment
Arm rest with control panel
8
Passenger seat (option)
9
● Seat Cobo SC47M-M200 (shown without arm rest)
Driver's seat
1
Horizontal adjustment
2
Pull the lever upwards to adjust
Damping setting for driver weight
3
Seat belt
4
Lever, fold backrest
5
Headrest
6
Pull out or push in for height adjustment
● Seat Grammer MSG75GL / 522 (shown without arm
rest)
Driver's seat with air suspension
1
Height adjustment
2
Horizontal adjustment
3
Pull the lever upwards to adjust
Seat belt
4
Backrest inclination adjustment
5
60
1. Adjust the inclination, height and position of the left arm
rest for operating the control panel.
2. Adjust the driver's seat so that the pedals and steering
wheel can be operated safely. The Grammer and König
driver's seats have a lumbar support (lumbar support).
3. The height of the air-sprung driver's seat (Grammer and
King) can still be adjusted, bring the seat into the highest
possible position using the compressor, then release air
with the spring until the seat has dropped 2-3 cm.
4. The passenger seat backrest and seat are hinged. Un-
der the seat there is a storage compartment that can be
used for storing vehicle documents and miscellaneous
small items.
6.3

Setting the steering wheel position

DANGER
Danger of accident
Only adjust the position of the steering wheel when the de-
vice is standing.
Steering wheel height adjustment locking lever
1
Steering wheel inclination adjustment lever
2
1. Pull and hold the inclination adjustment lever and set the
steering wheel to the desired inclination.
2. Push in the lever.
3. Release the height adjustment locking lever and set the
steering wheel to the desired height.
4. Lock the locking lever.
6.4

Refuelling

Fuel cap
1
Right side panel
2
DEF container closure
3
English