Automatic Air-Conditioner (Optional); Interior Lighting; Sun Visor - Kärcher MC 250 Originalbetriebsanleitung

Footwell air duct
1
3. Keep the air duct free in the footwell in front of the wind-
screen. Otherwise it will fog up.

7.5.1 Automatic air-conditioner (optional)

The control elements are located in the ceiling console.
LCD display
1
Adjustment button (SET)
2
Air-conditioner on/off
3
1. After switching on, the LCD display shows the selected
temperature, the fan speed and the selected setting.
a In the test/diagnostic mode, it displays appropriate
messages for troubleshooting.
2. The settings can be selected using the adjustment but-
ton. To do this, switch on the air-conditioner.
a Press the adjustment button (SET).
b Turn the adjustment button clockwise or counterclock-
wise to select the desired settings.
c The system automatically returns to the main display
after a few seconds with the selected settings. Do not
press the adjustment button.
3. To set the contrast and brightness of the display, as well
as the temperature display in °C or °F, press the adjust-
ment button twice with the air-conditioner switched on.
50
Make the required settings by turning it clockwise or
counterclockwise. Press the adjustment button once to
save. Wait a few seconds, the system will automatically
return to the main display.
4. When the air-conditioner is turned off, the backlight
turns off and the preset setting is displayed.
5. The air-conditioner also has menus for setup, fault dis-
plays or statistics. This is reserved for the authorized
Customer Service. If you have any questions or in the
event of a fault, please contact the authorized Customer
Service.
7.6

Interior lighting

Press left: Lighting on
1
Middle position: Lighting is switched on by opening a
2
door
Press right: Lighting off
3
7.7

Sun visor

Sun visor
1
To operate, pull down to the desired position
2
Pull to unlock, sun visor moves upwards
3
English