Symbols On The Device; Description Of The Device; Installation - Kärcher BLV 36-240 Battery Originalbetriebsanleitung

Never modify or bypass safety devices.
Safety switch
The safety button is triggered by the fixing screw on the
protective grid. This prevents the user from injuring him-
self on the fan wheels and mulching blades when the
suction pipe is removed.

Symbols on the device

Read the operating instructions and all
safety instructions before operating the
device for the first time.
Always wear suitable eye protection and
hearing protection when working with the
device.
Do not subject the device to rain or moist
conditions.
Danger due to flung objects. Keep spec-
tators away from the work area.
Rotating fan wheels. Keep hands and
feet away from the openings while the
device is in operation.
The guaranteed sound level specified on
the label is 104 dB.
Setting for speed regulation.
Slider for suction pipe. Lock open = suc-
tion pipe is unlocked; lock closed = suc-
tion pipe is locked.
Pull: Quick-release catch
Vacuuming operations
Blowing mode

Description of the device

The maximum amount of equipment is described in
these operating instructions. Depending on the model
16
used, there are differences in the scope of delivery (see
packaging).
See graphics page for illustrations
Illustration A
Guide rollers
1
Nozzle for blower pipe
2
Lower suction pipe
3
Upper suction pipe
4
Battery pack unlocking button
5
Type plate
6
Motor casing
7
Motor casing locking pin
8
Unlocking button for blower pipe
9
Slider for suction pipe
10
Eyelet for carrying belt
11
Latch for protective grid
12
Fixing screw for protective grid
13
Protective grid
14
Front handle
15
Speed regulation
16
Rear handle
17
Trigger
18
Selector switch for blower / suction mode
19
Connecting piece
20
Upper blower pipe
21
Lower blower pipe
22
Adapter for collecting bag
23
Collecting bag
24
*Battery Pack Battery Power 36V
25
*Quick Charger Battery Power 36V
26
Carrying belt
27
* optional
Rechargeable battery pack
The device can be operated with a 36 V Kärcher Bat-
tery Power battery pack.
Installation of blower / suction device
The following describes the installation of the complete
blower and suction device. If the device is to be operat-
ed only as a blower or suction device, the corresponding
steps are omitted during assembly.
1. Allow the blower pipe nozzle to click into place in the
lower blower pipe.
Illustration B
2. Push the lever down and snap the blower pipe into
the adapter of the guide rollers in the desired posi-
tion.
Illustration C
English

Installation