Maintenance Intervals; Vehicle Maintenance Plan; Vehicle Lubrication Plan - Kärcher MC 250 Originalbetriebsanleitung

10.4 Maintenance intervals

Note
To preserve eligibility for warranty claims, all servicing and
maintenance work during the warranty period has to be
performed by an authorised Customer Service (ICL), in ac-
cordance with the inspection check list.
● Lubricate all bearings after washing the vehicle.

10.5 Vehicle maintenance plan

To be performed by the operator / customer.
Assembly Activity
Water cooler Clean radiator fins
Oil cooler Clean radiator fins
Coolant ex- Check the coolant level
pansion reser-
voir
Check the wa- Check seasonally or when
ter/antifreeze changing the coolant
mixing ratio
V-belt Check for tension and wear
and tear
Hydraulic oil Check the hydraulic oil level
tank (shown on display)
Hydraulic cou- Check for leaks
plings and con-
nections
Hydraulic hos- Check for leakage and dam-
es age
Note
Exchange the hydraulic hos-
es according to the inspection
checklist!
Battery poles Check the battery poles for
oxidation, brush off if neces-
sary, and lubricate with termi-
nal grease. Make sure the
connection cables are firmly
in place.
Check the en- Check
gine oil level
Brake fluid lev- Check
el
Cab dust filter Check
Tyres Check the condition and fill-
ing pressure
Wiping water Check the filling level
container
Battery Check
Exhaust sys- Visual inspection
tem
Lights Check for correction function X
Engine air filter Check / clean or replace air
filter.
Radiator grille Cleaning
Air-conditioner Check and clean the radiator
fins
66
● The intervals for testing and maintenance (daily / week-
ly) by the customer / operator are listed in the chapter
"Vehicle maintenance plan".
● Have the safety checks according to the applicable local
regulations performed by the Customer Service depart-
ment as necessary.
Further maintenance work must be carried out by the
authorized Customer Service according to the inspec-
tion checklist. Please inform the Customer Service de-
partment in time.
Assembly
Daily Wee
kly
Parking brake Check for correct function
X
Pedals
X
Steering
X
Warning stick-
er
Dust caps and
covers for hy-
draulics
X Screw connec-
tions
X Hoses and ca-
ble clamps
X Coolant hoses Check
Fuel lines and
connections
X
Bowden ca-
bles and mov-
ing parts
Electrical ca-
bles
Bearings / lu-
X
brication points

10.6 Vehicle lubrication plan

X
X
X
X
X
X
X
Lubrication point
Fresh water tank hinge,
X
above
Fresh water tank hinge, be-
X
low
X
English
Activity
Check for correct function
Check for correct function
Check the legibility, replace if
necessary
Check, replace if necessary
Check for tightness, tighten if
necessary
Check
Check for leaks
Check for freedom of move-
ment
Check for damage
Lubrication, see chapter "Ve-
hicle lubrication plan"
Quantity
1
1
Daily Wee
kly
X
X
X
X
X
X
X
X
X
X
X
X
Interval
Weekly
Weekly