Engine Coolant Level Check - SWM VAREZ 125 Handbuch - Gebrauch - Wartung

ENGINE COOLANT LEVEL CHECK

The engine coolant level must be between the MIN and
MAX notches on the clear reservoir (1).
The coolant level check must be carried out with engine
cold and motorcycle perpendicular to the ground.
If topping up is required, unscrew the plug (2) and pour
coolant through the filler neck.
It is also necessary to restore the level in the reservoir
(1).
CAUTION
With engine hot, do not remove the
reservoir plug, risk of burns!
32
EN -
BRAKE PAD WEAR CHECK
Check the wear status of front brake pads (2) and rear
brake pads (1).
The pads have a groove (3) that indicates wear;
-
when the groove has almost disappeared, the pair of
brake pads has to be replaced.
CAUTION
Contact an SWM dealer to have the brake
pads replaced.