SWM RS 125 R 2020 Handbuch - Gebrauch - Wartung Seite 94

SEAT REMOVAL
To access some components, it is necessary to remove
the seat as follows:
Turn the fixing pin (1) counter-clockwise in order to
-
release the seat (2) from the slot.
Lift the seat from the rear part (3) and release it from
-
the slots by pulling it towards the rear part of the
motorcycle (4).
REMOVING THE RIGHT SIDE PANEL
The fuses and the air filter are placed under the right
side panel (1).
To remove it, proceed as follows:
Remove the seat as described in the relevant
-
paragraph.
Unscrew the screws (2) and remove the panel (1).
-
31
EN -