Transport; Storage; Maintenance - Scheppach FS850 Originalbetriebsanleitung

12. Transport

Attention! Pull out the power plug
To transport the machine, set the machine head in
front and engage the locking pin (13). (Fig.5).

13. Storage

Store the device and its accessories in a dark, dry
and frost-proof place that is inaccessible to children.
The optimum storage temperature is between 5 and
30˚C.
Store the electrical tool in its original packaging.
Cover the electrical tool in order to protect it from
dust and moisture. Store the operating manual with
the electrical tool.

14. Maintenance

Caution! Pull out power plug.
• Replace worn out cutting discs.
• Replace damaged protection device
• Dust and pollution must be removed regularly from
the machine. The best way to clean the machine is
with a piece of cloth or brush.
• All moveable parts must be re-lubricated at period-
ic intervals.
• Do not use any corrosive substances to clean the
plastic. A damp cloth is sufficient in most cases.
• The tub (4) and coolant pump (14) must be cleaned
regularly to remove dirt, as otherwise the pump or
the pipe or the cooling of the diamond cutting disc
(10) is not guaranteed.
Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the fol-
lowing parts are therefore also required for use as
consumables.
Wear parts*: cutting wheel, carbon brush, table & cut-
ting head guides
* Not necessarily included in the scope of delivery!
Spare parts
Please quote the following in your order for spare
parts:
• Type of device
• Article No. of device
• Ident. No. of device
• Spare Part No. of the required spare part
26 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58