1
Bohrung im Abdeckprofil nur
auf der Nicht- Antriebsseite
Hole at the cover profile only
on the non-drive side
Ø 3,2
17
2
Torx T10
42
Ansicht von unten
view from below
5
Befestigungswinkel für das Abdeck profil
nur 1x auf der Nicht- Antriebsseite durch die
Durchgangsbohrung Ø 3,2 am Aufbauprofil
montieren
mount bracket for cover profile only once on
the non-drive side through the through-hole
Ø 3,2 at the extruded profile
2,9 x 9,5
5
2,9 x 9,5
Torx T10
bündig
flush
Abdeckprofil auf der Seite des
Antriebsmoduls ablängen
cut cover profile to length on the
side of the drive module
3
4