Herunterladen Inhalt Inhalt Diese Seite drucken

Technische Daten; Technical Specifications - Hautau ATRIUM HS comfort drive Montage- Und Betriebsanleitung

Vorschau ausblenden Andere Handbücher für ATRIUM HS comfort drive:
Inhaltsverzeichnis

Werbung

Technische Daten

Gesamtsystem
(Hub- und Verschiebeantrieb)
„HS comfort drive"
Flügelbreite (FB)
Flügelhöhe (FH)
Rahmenaußenbreite
Max� Flügelgewicht
Max� Verschiebekraft
des Antriebs
Elektrische Eigenschaften
Nennspannung
Zulässiger Spannungsbereich 21,6 bis 31,2 V DC
Max� zulässige Welligkeit
Stromaufnahme
Max� Leistungsaufnahme
Abschaltung in jeder Position
(Blockade)
Schutzklasse
Anschluss und Betrieb
Einschaltdauer
Lebensdauer
Auslesen von
Betriebszuständen
Wartung
Anschluss an WLAN-Box
Adresse (Auslieferzustand)
Einbau- und Umgebungsbedingungen
Nenntemperatur
Umgebungstemperatur
Schutzart
Umweltbedingungen
Hinweise zur Energieversorgung und Ansteuerung
Schaltnetzteile (SNT) und
Trafonetzteile
Kleinspannung (24 V)
Zulassungen und Nachweise
Elektrische Sicherheit
EMV Verträglichkeit
CE konform
EG Einbauerklärung
46
720 bis 3235 mm
1900 bis 2800 mm
max� 6500 mm
330 kg
200 N
24 V DC (-10%, +30%)
 ≤ 20% bezogen auf die
Nennspannung
4 A bei 24 V
100 W
ja, Sicherheitsabschaltung in
Richtung AUF und ZU bis 330 kg
III Sicherheitskleinspannung SELV
20 Zyklen oder ED 30
25�000 Zyklen
(Klasse 5 EN 13126-1)
ja
jährlich, gemäß allgemeinen
Instandhaltungsrichtlinien
103
20 °C
-5 bis +60 °C (Umweltklasse 1
gemäß VdS 2580)
IP 40 nach DIN EN 60529
nur für trockene Umgebungen;
keine Taubildung, keine aggres-
siven Dämpfe, keine staubigen
Umgebungen
C-Last geeignet mit Energie-
reserven für den Einschalt- und
Abschaltmoment der Antriebe
Überspannungskategorie I muss
gewährleistet sein
ja, gemäß EN 60335-1 und
EN 60335-2-103
ja, nach DIN EN 55014-1,
55014-2 und 61000-6-3
ja, gemäß EMV Richtlinie
2004/108/EG und Niederspan-
nungsrichtlinie 2006/95/EG
ja, siehe www�HAUTAU�de
hergestellt und geprüft gemäß
europäischen Richtlinien

Technical specifications

Complete system
(Lift drive and sliding drive)
„HS comfort drive"
Sash width (FB)
Sash height (FH)
Outer frame width
Max� sash weight
Max� sliding force of drive
Electrical characteristics
Rated voltage
Permitted voltage range
Max� allowable ripple
Current consumption
Max� power consumption
Switching-off in each position yes, safety switching-off
(blockade)
Protection class
Connection and operation
Duty cycle
Lifetime
Reading out of
operating conditions
Maintenance
Connection to WLAN-Box
Address (delivered condition) 103
Installation and environmental conditions
Nominal temperature
Ambient temperature range -5 to +60 °C (environmental
Protective system
Environmental conditions
Notes for power supply and control
Switching power
supplies (SNT) and trans -
former power supplies
Low voltage (24 V)
Approvals and certificates
Electrical safety
EMC compatibility
CE compliant
EC Declaration of
incorporation
720 to 3235 mm
1900 to 2800 mm
max� 6500 mm
330 kg
200 N
24 V DC (-10%, +30%)
21,6 to 31,2 V DC
 ≤ 20% related to rated voltage
4 A at 24 V
100 W
in direction OPEN and CLOSE
until 330 kg
III safety extra-low voltage SELV
20 cycles or ED 30
25�000 cycles
(class 5 EN 13126-1)
yes
once a year, acc� to general
maintenance guidelines
20 °C
category 1 acc� to VdS 2580)
IP 40 acc� to DIN EN 60529
for dry environments, only;
no dew formation, no aggressive
fumes, no dusty environments
suitable for C-load with power
reserves for the moment of
switching-on and switching-off
of the drives
overvoltage category I must be
guaranteed
yes, acc� to EN 60335-1 and
EN 60335-2-103
yes, acc� to DIN EN 55014-1,
55014-2 und 61000-6-3
yes, acc� to EMC Directive
2004/108/EG and Low-voltage
Directive 2006/95/EG
yes, refer to www�HAUTAU�de
manufactured and tested acc� to
European directives

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Atrium s comfort drive

Inhaltsverzeichnis