Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DO NOT turn the flywheel (7) anticlockwise. Serious damage to the slicer could be caused.
You will need to turn the flywheel (7) 4/5 times before the product touches the blade (16). Whilst the carriage
(5) moves forward (away from the operator), the blade (16) enters the product. Guided by the deflector (2),
the slice is detached and drops onto the slice receiving surface (1). As the carriage (5) returns (towards the
operator), a mechanical device is operated that moves the product holder (4) sideways towards the blade
(16). The amount of sideways movement is set by using the slice thickness control knob (13).
You should stop turning the flywheel (7) once the operation is complete; the blade will halt its movement
(16). Move the product holder (4) (with the remaining product) away from the blade (16) using either the
handwheel (12) or the fast forward lever (11).
17
Werbung
Inhaltsverzeichnis
