CookMax Starti 90415003 Handbuch Seite 17

Using the slicer
Turn the flywheel (7) in order to move the carriage (5) to its forward limit (towards the operator); move the
product holder (4) away as far as its limit of travel (furthest from the blade) using either the handwheel (12) or
the fast forward lever (11); position the product to be sliced on the product holder (4) and hold in place with
the pusher (3) (so that it can't move), whilst adjusting the height.
Turn the knob (13) in order to set the required slice thickness; bring the product holder (4) (with the product)
back from its limit of travel (towards the blade) using either the handwheel (12) or the fast forward lever (11).
Move the blade guard (9) to the left by loosening
the knob (9a).
WARNING: exercise great caution if the blade
guard (9) is not fitted; the blade (16) is
extremely sharp.
Hold the handle (6) and turn the flywheel (7)
clockwise in order to begin blade rotation and the
alternating movement of the product holder (4)
(fig. 17).
16